CITROEN C2 Handbook page 122

C3
B1BP2N0C
CHECKING AND SETTING THE VALVE TIMING
[1] Engine flywheel peg Ø 12 mm
[2] Camshaft pulley peg Ø 8 mm
[3] Crankshaft pulley peg Ø 5 mm
Preliminary operations.
Remove:
- The front RH wheel.
- The front RH splash-shield.
- The accessories belt (see corresponding operation) .
Uncouple:
- The supply unions (1).
- The air/air heat exchanger inlet/outlet pipes (3).
- The exhaust line (at the flexible pipe) .
Disconnect the connector (2).
Support the engine by means of a roller jack equipped with a chock.
Remove the engine supports (4) and (5).
116
Engine: 8HY
Tools.
: (-).0194-C
: (-).0194-B
: (-).0194-A