B1DP1LLD
SPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Engine: 9HX
Crankshaft bearing cap cover
Pre-tighten the 10 screws (17) (from 1 to 10) to
Pre-tighten the 14 screws (19) (from 11 to 24) to
Tighten the 2 screws (18) (inside the flywheel bell housing) to
Slacken the screws (17) by
Tighten the 10 screws (17) (from 1 to 10) to
Tighten the screws (17) (from 1 to 10) by
Tighten the 14 screws (19) (from 11 to 24) to
(17) Bearing cap fixing screws (screws M9)
(18) Crankshaft bearing cap cover screws (screws M6)
(19) Crankshaft bearing cap cover screws (screws M6)
Cylinder block
Tightening Method:
Sequence for tightening the screws (17), (18) and (19)
66
1
0,6
0,8
180°
3
140°
0,8