Tyres inflated to correct pressures.
Steering rack locked at mid point (see corresponding operation) .
E1AP09MD
Front height
H1 = R1 - L1
H1 = Measurement between the measuring zone underneath the front
subframe and the ground.
R1 = Front wheel radius under load.
L1 = Distance between the wheel axis and the measuring zone underneath
the front subframe.
AXLE GEOMETRY
Conditions for checking and adjusting
Vehicle at reference height.
Vehicle heights at reference height
L1
H2 = Measurement between the measuring zone underneath the rear
sill and the ground.
R2 = Rear wheel radius under load.
L2 = Distance between the wheel axis and the measuring zone underneath
the rear sill.
201
Rear height
L2
H1 = R1 - L1
C3