CITROEN C2 Handbook page 128

C3
CHECKING AND SETTING THE VALVE TIMING
Engine: 8HY
Setting the timing (continued).
Checking the setting.
IMPERATIVE: Just prior to refitting, carry out the following tests.
Check that:
- The rollers and the coolant pump operate freely (no play and no tight spot) .
- There are no traces of oil (from the crankshaft and camshaft sealing rings) .
- There is no leak of coolant fluid (from the coolant pump) .
- The target track of the engine speed sensor (14) is not damaged or scratched (if necessary replace
the defective components) .
Refitting.
Fit the timing belt on the crankshaft pinion.
Position the belt on the guide roller, with the belt well tensioned.
Refit:
- The timing protector (13).
- The sensor (14).
B1EP18WD
122