C2 - C3 - C3 PLURIEL
B1BP2LSC
B1BP2LTC
AUXILIARY EQUIPMENT DRIVE BELT
[1] Pliers for removing plastic pegs
[2] Belt tension measuring instrument
Vehicle without air conditioning.
Removing.
Slacken:
- Screw (2).
- Screw (3).
- Tensioning screw (1).
Push the alternator back towards the engine.
Remove the belt.
78
Engines: HFX - KFV - NFU - NFS
Tools.
: 7504 -T
: 4122-T
Refit the belt.
Respect the following sequence:
- Crankshaft pinion.
- Alternator pulley.
Place tool [2] on the belt.
Tighten screw (1) to achieve a tension of:
55 ± 3 SEEM units.
Tighten:
- Screw (3).
- Screw (2).
Remove tool [2] and complete the refitting.
Refitting