C3 PLURIEL
Tyres inflated to correct pressures.
Steering rack locked at mid point (see corresponding operation) .
E1AP0AUD
Front height
H1 = R1 - L1
H1 = Measurement between the measuring zone underneath the front
subframe and the ground.
R1 = Front wheel radius under load.
L1 = Distance between the wheel axis and the measuring zone underneath
the front subframe.
Conditions for checking and adjusting
Vehicle at reference height.
Vehicle heights at reference height
L1
AXLE GEOMETRY
H2 = Measurement between the measuring zone underneath the rear sill
and the ground.
R2 = Rear wheel radius under load.
L2 = Distance between the wheel axis and the measuring zone underneath
the rear sill.
206
Rear height
L2
H2 = R2 + L2