CITROEN C2 Handbook page 130

C3
CHECKING AND SETTING THE VALVE TIMING
Engine: 8HY
Adjusting the timing belt tension (continued).
IMPERATIVE: Never rotate the engine backwards.
WARNING: Do not touch or damage the track of the target of the engine speed sensor (14).
Peg the crankshaft, using tool [3].
Check the position of the tensioner roller (the alignment of the marks «f» and «g» should be correct) .
If this is not the case, repeat the operation to tension the belt.
Peg the camshaft pulley, using tool [2].
IMPERATIVE: Should it be impossible to peg the camshaft, check that the offset between the
camshaft hole and the pegging hole is not more than 1 mm. If the offset is too great, repeat the
operation.
Remove the pegs [2] and [3].
Refit tool [1] at «a».
Remove the screw (8).
Complete the refitting.
B1EP18XC
124