Tools
Tyres inflated to correct pressures.
Steering rack locked at mid point (see corresponding operation) .
E1AP0F3D
Front height
H1 = R1 - L1
H1 = Measurement between the measuring zone underneath the front
subframe and the ground.
R1 = Front wheel radius under load.
L1 = Distance between the wheel axis and the measuring zone underneath
the front subframe.
AXLE GEOMETRY
Conditions for checking and adjusting
: [1] Gauge for measuring the the wheel radius, 4 bolts
Vehicle at reference height.
Vehicle heights at reference height
L1
H2 = Measurement between the measuring zone underneath the rear sill
and the ground.
R2 = Rear wheel radius under load.
L2 = Distance between the wheel axis and the measuring zone underneath
the rear sill.
361
: 4300-T.
Rear height
L2
H2 = R2 + L2
C4