Q Ingress Filter - Planet FGSW-2620VM User Manual

4.3.1.2 802.1Q Ingress Filter

This section provides 802.1Q Ingress Filter of each port from the Switch, the screen in
OObject
Ingress Filter
Acceptable Frame type
PVID
Save button
Figure 4-3-5 802.1Q Ingress filter interface
Description
Ingress filtering lets frames belonging to a specific VLAN to be forwarded if the port
belongs to that VLAN.
Enable: Forward only packets with VID matching this port's configured VID.
Disable: Disable Ingress filter function.
ALL: Acceptable all Packet.
Tag Only: Only packet with match VLAN ID can be permission to go through the
port.
Set the port VLAN ID that will be assigned to untagged traffic on a given port. This
feature is useful for accommodating devices that you want to participate in the
VLAN but that don't support tagging. The switch each port allows user to set one
VLAN ID, the range is 1~255, default VLAN ID is 1. The VLAN ID must as same as
the VLAN ID that the port belong to VLAN group, or the untagged traffic will be
dropped.
Press the button to save configurations.
FGSW-2620VM User's Manual
40
Figure 4-3-5 appears.