Switch Management; About Web-Based Management; Preparing For Web Management; Online Help - Planet FGSW-2620VM User Manual

This section introduces the configuration and functions of the Web-Based management. The following configuration
descriptions are based on the kernel software version 11.14.

3.1 About Web-based Management

Inside the CPU board of the switch exist an embedded HTML web site residing in flash memory. It offers advanced
management features and allow users to manage the switch from anywhere on the network through a standard browser
such as Microsoft Internet Explorer.
The Web-Based Management supports Internet Explorer 5.0. It is based on Java Applets with an aim to reduce network
bandwidth consumption, enhance access speed and present an easy viewing screen.
Note: By default, IE5.0 or later version does not allow Java Applets to open sockets. The user has to explicitly modify the
browser setting to enable Java Applets to use network ports.

3.2 Preparing for Web Management

Before use web management, you can use console to login the Switch checking the default IP of the Switch. Please
refer to Console Management Chapter for console login. If you need change IP address in first time, you can use
console mode to modify it. The default value is as below:
IP Address: 192.168.0.100
Subnet Mask:
255.255.255.0
Default Gateway: 192.168.0.254
User Name: admin
Password: admin

3.3 Online Help

You can click

3.4 System Login

1. Launch the Internet Explorer.
2. Type "http://" and the IP address of the FGSW-2620VM and press "Enter".
3. The login screen appears.
4. Key in the user name and password. The default user name and password is "admin ".
button when you have any configuration question during the configuring.
FGSW-2620VM User's Manual

3. SWITCH MANAGEMENT

15