OObject
Strings
RO
RW
Add button
Remove button
4.1.4.2 Trap Configuration
Trap Manager
A trap manager is a management station that receives traps, the system alerts generated by the switch. If no trap
manager is defined, no traps will issue. Create a trap manager by entering the IP address of the station and a community
string.
Figure 4-1-5 SNMP-System Configuration screenshot
Description
Fill the name of string.
Read only. Enables requests accompanied by this string to display
MIB-object information.
Read write. Enables requests accompanied by this string to display
MIB-object information and to set MIB objects.
Press the button to add the management SNMP community strings
on the Switch.
Press the button to remove the management SNMP community
strings on the Switch.
Figure 4-1-6 Trap Management screenshot
FGSW-2620VM User's Manual
21