Work Ports
Choose Port
Add button
Remove button
Apply button
Delete button
4.2.5.2 Aggregator Information
When you had setup the LACP aggregator, you will see relation information in here.
OObject
Group Key
Port Member
4.2.5.3 Aggregator State Activity
When you had setup the LACP aggregator, you can configure port state activity. You can mark or un-mark the port.
Activity page.
Allow max four ports can be aggregated at the same time. If LACP static trunk group, the
exceed ports are standby and able to aggregate if work ports fail. If it is local static trunk
group, the number must be as same as the group member ports.
Select the ports to join the trunk group. Allow max four ports can be aggregated at the
same time.
Press the button to add the port.
Press the button to remove unwanted ports.
Press the button to save the configuerations.
Press the button to delete Trunk Group and the Group ID.
Figure 4-2-7 Trunking - Aggregator Information interface
Description
Indicates the Static Trunking Groupd ID.
Indicates the selected ports that joined the Trunk group.
FGSW-2620VM User's Manual
30