Planet FGSW-2620 User Manual

With 24 rj-45 10/100mbps ports
Hide thumbs Also See for FGSW-2620:

Advertisement

Quick Links

Trademarks
Copyright © PLANET Technology Corp. 2006.
Contents subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.
Disclaimer
PLANET Technology does not warrant that the hardware will work properly in
all environments and applications, and makes no warranty and representation, either
implied or expressed, with respect to the quality, performance, merchantability,
or fitness for a particular purpose.
PLANET has made every effort to ensure that this User's Manual is accurate;
PLANET disclaims liability for any inaccuracies or omissions that may have
occurred.
Information in this User's Manual is subject to change without notice and
does not represent a commitment on the part of PLANET. PLANET assumes no
responsibility for any inaccuracies that may be contained in this User's Manual.
PLANET makes no commitment to update or keep current the information
in this User's Manual, and reserves the right to make improvements to this
User's Manual and/or to the products described in this User's Manual, at any
time without notice.
If you find information in this manual that is incorrect, misleading, or incomplete,
we would appreciate your comments and suggestions.

FCC Warning

This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the Instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.

CE Mark Warning

This is a Class A product. In a domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate
measures.
WEEE Warning
To avoid the potential effects on the environment and human health as a
result of the presence of hazardous substances in electrical and electronic
equipment, end users of electrical and electronic equipment should
understand the meaning of the crossed-out wheeled bin symbol. Do not
dispose of WEEE as unsorted municipal waste and have to collect such
WEEE separately.
Revision
PLANET 24-Port 10/100Mbps+ 2-Port Gigabit Ethernet Switch User's Manual
FOR MODEL: FGSW-2620
Rev: 2.0(October.2006)
Part No: 2010-A50060-000

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FGSW-2620 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Planet FGSW-2620

  • Page 1: Fcc Warning

    All other trademarks belong to their respective owners. Disclaimer PLANET Technology does not warrant that the hardware will work properly in all environments and applications, and makes no warranty and representation, either implied or expressed, with respect to the quality, performance, merchantability, or fitness for a particular purpose.
  • Page 2: Table Of Contents

    1.2 HOW TO USE THIS MANUAL 1.3 PRODUCT FEATURES 1.4 PRODUCT SPECIFICATIONS 2. INSTALLATION 2.1 PRODUCT DESCRIPTION 2.1.1 Product Overview 2.1.2 FGSW-2620 Front Panel 2.1.3 LED Indicators 2.1.4 FGSW-2620 Rear Panel 2.2 INSTALLING A FGSW-2620 2.2.1 Desktop Installation 2.2.2 Rack Mounting 3.
  • Page 3: Introduction

    This 24-Port 10/100Mbps+ 2-Port Gigabit Ethernet Switch Users’ Manual is structured as follows: ● Section 2, Installation It explains the functions of Switch and how to physically install the FGSW-2620. ● Section 3 Switch operation It explains the Switch operation of FGSW-2620.
  • Page 4: Product Specifications

    1.4 Product Specifications Product FGSW-2620 Hardware Specification Ports 24 10/ 100Base-TX RJ-45 Auto-MDI/MDI-X ports Gigabit ports 2 10/100/1000Mbps ports Switch Processing Scheme Store-and-forward Throughput 6.54Mpps (packet per second) Switch fabric 8.8Gbps Address Table 8K entries Share data Buffer 2.5Mbit Back pressure for half duplex, IEEE 802.3x Pause...
  • Page 5: Installation

    2.1.1 Product Overview PLANET FGSW-2620 is Ethernet Switch with 24 RJ-45 10/100Mbps ports. The Switch also provides up to two 10/100/1000Mbps ports for cost effective high-performance network connectivity. With its 8.8Gbps non-blocking switch fabric, the PLANET Switch can also provide a local, high bandwidth, Fast Ethernet network for your departmental backbone.
  • Page 6: Fgsw-2620 Rear Panel

    The rear panel of the Switch indicates an AC inlet power socket, which accepts input power from 100 to 240VAC, 50-60Hz. Figure 2-2 shows Rear panel of the Switch. Figure 2-2 Rear Panel of FGSW-2620 1. The device is a power-required device, it means, it will not work till it is powered.
  • Page 7: Desktop Installation

    2.2.1 Desktop Installation To install a Switch on a desktop or shelf, simply complete the following steps: Step1: Attach the rubber feet to the recessed areas on the bottom of the Switch. Step2: Place the Switch on a desktop or shelf near an AC power source. Step3: Keep enough ventilation space between the Switch and the surrounding objects.
  • Page 8 You must use the screws supplied with the mounting brackets. Damage  caused to the parts by using incorrect screws would invalidate your Caution: warranty. Step3: Secure the brackets tightly. Step4: Follow the same steps to attach the second bracket to the opposite side. Step5: After the brackets are attached to the Switch, use suitable screws to securely attach the brackets to the rack, as shown in figure 2-4.
  • Page 9: Switch Operation

    3. SWITCH OPERATION 3.1 Address Table The Switch is implemented with an address table. This address table composed of many entries. Each entry is used to store the address information of some node in network, including MAC address, port no, etc. This information comes from the learning process of Ethernet Switch.
  • Page 10: Auto-Negotiation

    Check the cable connection of the FGSW-2620. Performance is bad Solution: Check the speed duplex mode of the partner device. The FGSW-2620 is run at Auto-negotiation mode and if the partner is set to half duplex, then the performance will be poor.
  • Page 11: Appendix A Networking Connection

    APPENDIX A NETWORKING CONNECTION A.1 Switch‘s RJ-45 Pin Assignments 1000Mbps, 1000Base T Contact MDI-X BI_DA+ BI_DB+ BI_DA- BI_DB- BI_DB+ BI_DA+ BI_DC+ BI_DD+ BI_DC- BI_DD- BI_DB- BI_DA- BI_DD+ BI_DC+ BI_DD- BI_DC- 10/100Mbps, 10/100Base-TX RJ-45 Connector pin assignment Contact MDI-X Media Dependant Interface Media Dependant Interface -Cross Tx + (transmit) Rx + (receive)
  • Page 12: Cable Pin Assignments

    A.2 RJ-45 cable Pin Assignments The standard RJ-45 receptacle/connector There are 8 wires on a standard UTP/STP cable and each wire is color-coded. The following shows the pin allocation and color of straight cable and crossover cable connection: Figure A-1: Straight-Through and Crossover Cable Please make sure your connected cables are with same pin assignment and color as above picture before deploying the cables into your network.
  • Page 13 Part No.:2010-A50060-000...

Table of Contents