Rate Limit; Ingress Bandwidth Control - Planet GS-4210-16T2S User Manual

4.8.5 Rate Limit

Configure the switch port rate limit for the switch port on this page.

4.8.5.1 Ingress Bandwidth Control

This page provides to select the ingress bandwidth preamble. The Ingress Bandwidth Control Setting and Status screens in
Figure 4-8-29, Figure 4-8-30
The page includes the following fields:
Object
• Burst Size
• Port
• State
•
Rate (Kbps)
Button
: Click to apply changes.
User's Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S
and Figure 4-8-31 appear.
Figure 4-8-29: Ingress Bandwidth Control Settings Page Screenshot
Description
Allow assigning burst size and the options are 1 to 65535. Unit: Bytes.
Select port number for this drop down list.
Enable or disable the port rate policer. The default value is "Disabled".
Configure the rate for the port policer. The default value is "unlimited". Valid
values are in the range 0 to 1000000, must a multiple of 16.
Figure 4-8-30: Ingress Port Burst Size Configuration Page Screenshot
230