Recording A Still Image From Other Equipment - Sony DCR-PC115E Operating Instructions Manual

Recording an image from a tape
as a still image
Recording a still image from
other equipment
Before operation
Set DISPLAY to LCD in the menu settings. (The
default setting is LCD.)
(1) Set the POWER switch to VCR.
(2) Play back the recorded tape, or turn the TV on
to see the desired programme.
The image of the other equipment is
displayed on the LCD screen or viewfinder.
(3) Follow steps 3 and 4 on page 167.
Using the A/V connecting cable
OUT
VCR
: Signal flow/
Connect the yellow plug of the A/V connecting
cable to the video jack on the VCR or the TV.
If your TV or VCR has an S video jack
Pictures can be reproduced more faithfully by
using an S video cable (optional).
With this connection, you do not need to connect
the yellow (video) plug of the A/V connecting
cable.
Connect an S video cable (optional) to the S video
jacks of both your camcorder and the TV or VCR.
This connection produces higher quality DV
format pictures.
S VIDEO
VIDEO
AUDIO
(1)
(2)
(3)
S VIDEO
AUDIO/
VIDEO
169