Sony DCR-PC115E Operating Instructions Manual page 130

Labelling a cassette
To erase the label you have made
Select and decide upon [C] with the control C
button in step 4. The last character is erased.
To change the label you have made
Insert the cassette to change the label, and
operate in the same way to make a new label.
If you set the write-protect tab of the tape to
lock
You cannot label a cassette. Slide the write-
protect tab to release the write protection.
If the tape has too many index signals
You may not be able to label a cassette because
the memory is full. In this case, delete data you
do not need.
If you have superimposed titles in the cassette
When the label is displayed, up to four titles also
appear.
When the "-----" indicator has fewer than 10
spaces
The cassette memory is full.
The "-----" indicates the number of characters
you can select for the label.
To erase the character
Press [C]. The last character is erased.
To enter a space
Select [ Z& ? ! ], then select the blank part.
C
130