Connecting To A Wall Socket - Sony DCR-PC115E Operating Instructions Manual

Step 1 Preparing the power
supply

Connecting to a wall socket

When you use your camcorder for a long time,
we recommend that you power it from a wall
socket using the AC power adaptor.
(1) Open the jack cover. Connect the AC power
adaptor supplied with your camcorder to the
DC IN jack on your camcorder with the plug's
v mark facing up.
(2) Connect the mains lead to the AC power
adaptor.
(3) Connect the mains lead to a wall socket.
1
PRECAUTION
The set is not disconnected from the AC power
source (mains) as long as it is connected to the
wall socket, even if the set itself has been turned
off.
Notes
•The AC power adaptor can supply power even
if the battery pack is attached to your
camcorder.
•The DC IN jack has "source priority." This
means that the battery pack cannot supply any
power if the mains lead is connected to the DC
IN jack, even when the mains lead is not
plugged into a wall socket.
Using a car battery
Use Sony DC Adaptor/Charger (optional).
Refer to the operating instructions of the DC
Adaptor/Charger for further information.
(1)
(2)
(3)
2,3
•
•
v
23