Recording A Still Image From Other Equipment - Sony TRV230 - Digital8 Camcorder Operating Instructions Manual

Recording an image from a tape as a still image

Recording a still image from other equipment

Before operation
Set DISPLAY to LCD in the menu settings. (The default setting is LCD.)
(1) Set the POWER switch to VCR.
(2) Play back the recorded tape, or turn the TV on to see the desired program.
The image from TV or VCR appears on the screen of your camcorder.
(3) Follow the steps 3 and 4 on page 103.
Using the A/V connecting cable
: Signal flow
Connect the yellow plug of the A/V connecting cable to the video jack on the VCR or
the TV.
If your TV or VCR has an S video jack
Connect using an S video cable (optional) to obtain high-quality pictures.
With this connection, you do not need to connect the yellow (video) plug of the A/V
connecting cable.
Connect an S video cable (optional) to the S video jacks of both your camcorder and the
TV or VCR.
Using the i.LINK cable (DV connecting cable)
104
OUT
S VIDEO
VIDEO
DV
DV OUT
(optional)
: Signal flow
AUDIO / VIDEO
S VIDEO
DV IN/OUT