Recording A Still Image From Other Equipment - Sony Handycam DCR-TRV530 Operating Instructions Manual

Recording an image from a tape as a still image

Recording a still image from other equipment

Before operation
Set DISPLAY to LCD in the menu settings. (The default setting is LCD.)
(1) Set the POWER switch to VCR.
(2) Play back the recorded tape, or turn the TV on to see the desired program.
(3) Follow the steps 3 and 4 on page 103.
Using the A/V connecting cable
Connect the yellow plug of the A/V connecting cable to the video jack on the VCR or
the TV.
If your TV or VCR has an S video jack
Connect using an S video cable (optional) to obtain high-quality pictures.
With this connection, you do not need to connect the yellow (video) plug of the A/V
connecting cable.
Connect an S video cable (optional) to the S video jacks of both your camcorder and the
TV or VCR.
Using the i.LINK cable (DV connecting cable)
Note
The "
"Memory Stick" again, and record distortion-free images.
– When attempting to input images that are distorted due to poor radio wave reception
when a TV tuner unit is in use
– Between scenes or in the various playback modes on the tape recorded in Hi8/
104
standard 8 system
The image from TV or VCR appears on the screen of your camcorder.
OUT
S VIDEO
VIDEO
: Signal flow
DV
DV OUT
: Signal flow
" may flash in the following instances. If this happens, eject and insert
AUDIO / VIDEO
S VIDEO
(optional)
DV IN/OUT