Sony DCR-PC115E Operating Instructions Manual page 114

Recording video or TV
programmes
Using the Remote Commander
In step 3, press z REC and MARK
simultaneously, then immediately press X. And
z
in step 5, press X at the scene where you want to
X
start recording from.
X
You can connect one VCR only using the i.LINK
cable (DV connecting cable)
During digital editing
The colour of the display may be uneven.
However, this does not affect the dubbed picture.
If you record playback pause picture with the
DV jack
The recorded picture becomes rough. And when
you play back the picture using your camcorder,
the picture may jitter.
Before recording
Make sure that the DV IN indicator appears on
the screen. The DV IN indicator may appear on
both equipment.
Note on the Remote Commander
Your camcorder works in the commander mode
VTR 2. Commander modes 1, 2 and 3 are used to
distinguish your camcorder from other Sony
VCRs to avoid remote control misoperation. If
you use another Sony VCR in the commander
mode VTR 2, we recommend changing the
commander mode or covering the sensor of the
VCR with black paper.
114