Audio Dubbing - Sony DCR-PC115E Operating Instructions Manual

Audio dubbing

You can record an audio sound to add to the
original sound on a tape by connecting audio
equipment or a microphone. If you connect the
audio equipment, you can add sound to your
recorded tape by specifying starting and ending
points. The original sound will not be erased.
Use the Remote Commander for this operation.
Select one of the following connections to add an
audio sound.
Connecting the microphone
with the MIC jack
: Signal flow/
You can check the recorded picture and sound by
connecting the AUDIO/VIDEO jack to a TV.
The recorded sound is not output from a speaker.
Check the sound by using the TV or headphones.
Connecting the microphone
with the intelligent accessory
shoe
Intelligent Accessory Shoe/
118
Microphone (optional)/
MIC
(PLUG IN POWER)
Microphone (optional)/