— Playback – Basics —
Playing back a tape
You can monitor the playback picture on the
screen. If you close the LCD panel, you can
monitor the playback picture in the viewfinder.
You can control playback using the Remote
Commander supplied with your camcorder.
(1) Install the power source and insert the
recorded tape.
(2) Set the POWER switch to VCR while pressing
the small green button.
(3) Open the LCD panel while pressing OPEN.
(4) Press m to rewind the tape.
(5) Press N to start playback.
(6) To adjust the volume, press either of the two
buttons on VOLUME.
When you close the LCD panel, sound is
muted.
6
To stop playback
Press x.
44
4
REW
VOLUME
3
(1)
(2)
(3)
(4)
(5)
(6)
5
PLAY
1
m
N
2
POWER
LOCK
x