Searching For The Date Without Using Cassette Memory - Sony DCR-PC115E Operating Instructions Manual

Searching a recording by date
– Date search
To stop searching
Press x.
Note
If one day's recording is less than two minutes,
your camcorder may not accurately find the
point where the recording date changes.
If a tape has a blank portion between
recorded portions
The date search function may not work correctly.
Cassette memory
The tape cassette memory can hold six recording
date data. If you search the date among seven or
more data, see "Searching for the date without
using cassette memory" below.
Searching for the date without
using cassette memory
(1) Set the POWER switch to VCR.
(2) Press MENU, then select and decide upon CM
SEARCH in to OFF with the control
button (p. 132).
(3) Press SEARCH MODE on the Remote
Commander repeatedly until the DATE
SEARCH indicator appears.
The indicator changes as follows:
DATE SEARCH t PHOTO SEARCH
no indicator
(4) Press . on the Remote Commander to
search for the previous date or press > on
the Remote Commander to search for the next
date. Your camcorder automatically starts
playback at the point where the date changes.
Each time you press . or >, your
camcorder searches for the previous or next
date.
To stop searching
Press x.
T PHOTO SCAN
x
(1)
(2)
(3)
t
(4)
.
>
>
x
T
.
87