Charging The Battery Pack - Sony DCR-PC115E Operating Instructions Manual

Step 1 Preparing the power
supply

Charging the battery pack

Use the battery pack after charging it for your
camcorder.
Your camcorder operates only with the
"InfoLITHIUM" battery pack (M series).
See page 239 for details of "InfoLITHIUM"
battery pack.
(1) Open the jack cover and connect the AC
power adaptor supplied with your camcorder
to the DC IN jack with the plug's v mark
facing up.
(2) Connect the mains lead to the AC power
adaptor.
(3) Connect the mains lead to the wall socket.
(4) Set the POWER switch to OFF (CHG). The
CHG lamp lights up when the charge begins.
After the charge is completed, the CHG lamp
goes out. (full charge)
2
After charging the battery pack
Disconnect the AC power adaptor from the DC
IN jack on your camcorder.
(1)
v
(2)
(3)
(4)
CHG lamp/
4
1
POWER
LOCK
19