Sony DCR-PC115E Operating Instructions Manual page 52

Recording a still image on a tape
– Tape Photo recording
Notes
•During tape photo recording, you cannot
change the mode or setting.
•When recording a still image, do not shake
your camcorder. The image may fluctuate.
•You cannot use PHOTO during the following
operations:
– Fader
– Digital effect
If you record a moving subject with tape
photo recording function
When you play back the still image on other
equipment, the image may fluctuate.
This is not a malfunction.
To use the tape photo recording function
using the Remote Commander
Press PHOTO on the Remote Commander. Your
camcorder records an image on the screen
immediately.
To use the tape photo recording function
during normal CAMERA recording
You cannot check an image on the screen by
pressing PHOTO lightly. Press PHOTO deeper.
The still image is then recorded for about seven
seconds, and your camcorder returns to the
standby mode.
To record clear and less fluctuated still images
We recommend that you record on "Memory
Stick"s.
52
•
•
•