Still Image - Sony DCR-PC115E Operating Instructions Manual

Superimposing a still image in
the "Memory Stick" on an image
– MEMORY MIX
Recording superimposed
images on a "Memory Stick" as
a still image
Before operation
Insert a "Memory Stick" recorded still images
into your camcorder.
(1) Set the POWER switch to MEMORY. Make
sure that the LOCK switch is set to the right
(unlock) position.
(2) Press MEMORY MIX.
The last recorded or last composed image
appears on the lower part of the screen as a
thumbnail image.
(3) Press MEMORY+/– to select the image you
want to superimpose.
To see the previous image, press MEMORY –.
To see the next image, press MEMORY+.
(4) Select the desired mode with the control
button.
The mode changes as follows:
M. CHROM y M. LUMI y C. CHROM
(5) Press z on the control button.
The still image is superimposed on the
moving image.
(6) Press b/B on the control button to adjust the
effect.
M. CHROM – The colour (blue) scheme of
the area in the still image
which is to be swapped with
a moving image
M. LUMI – The colour (bright) scheme
of the area in the still image
which is to be swapped with
a moving image
C. CHROM – The colour (blue) scheme of
the area in the moving
image which is to be
swapped with a still image
The fewer bars there are on the screen, the
stronger the effect.
(7) Press PHOTO deeper to start recording.
The image displayed on the screen will be
recorded on a "Memory Stick." Recording is
complete when the bar scroll indicator
disappears.
(1)
(2)
(3)
(4)
y
(5) z
(6)
b B
(7)
y
175