Sharp R-9320 Service Manual page 87

EE
m
FIXING PROCEDURE OF CORD ANCHORAGE
General: j
/
Content:
As for the above subject, sometime it may cause to have wrong fixing about two pieces of cord anchorage
unit. But this cord anchorage is an important part for the safety, therefore it must be fixed correctly and
firmly.
1. The cord anchorage which is used to secure the mains supply cord can be fixed in two different ways.
2. If you fix them as shown in Figure 2, the mains supply cord will not be secured firmly.
3. Therefore, make sure to fix them as shown in figure 1.
MAINS
SUPPLY
LSTPPOOOgYBFO
CORD ANCHORAGE
(LOWER)
-w
C&D ANCHORAGE
(UPPER) LSTPPOO08YBFO
3mm
Figure 1. Correct Fixing
Figure 2. Wrong Fixing
I
i
85