Sharp R-9320 Service Manual page 7

EE:
m
CLOCKSETTING
This oven functions as a clock to keep the time of day. To set the clock, follow this procedure. When
oven is plugged in, the display will show [ss:83] and variable cooking indicators, flashing each
second.
Touch the CLEAR pad; i::li-;'z! will appear. After one minute the display will show
y---my .
* Suppose you want to enter the correct time of day 12:30 (A.M. or P.M.)
Procedure
/
Pad Order
Display
1
1. Touch the AUTO START/CLOCK
pad.
AllToslwT :
/-
, UCXK i
I
I
j 2. Enter the correct time of day by - 1
____-
I
touching the numbers in sequence.
1 2 ~3 O:/
~
------------------I
!
I /
I I
I
3. Touch the AUTO START/CLOCK
pad again.
1 AuTosm?T /
i CLOCK i
I
l Zl l ,7 I-..
II- l J-s
I I
I
The clock is now set and will keep the time of day. If power to the unit is interrupted, the display will
intermittently show
1
j 88: 1'1381 and variable cooking indicators after the power is reinstated. To reset
the clock, touch the CLEAR pad and then repeat the steps above.
NOTE: * This is a 12 hour clock. L c RP,"R I will appear in the readout if you attempt to enter an in-
correct clock time.
Forexample, if you ateempt to enter 8:61 or 13:00, ,m and
incorrect clock time will appear repeatedly. To erase ERR~/Wouch the CLEAR pad. If
you accidently touch more than 4 number pads, the last 4 numbers you have touched will
appear on the display.
MINUTE TIMER SETTING
This oven can be used as a timer for timing up to 99 minutes, 99 seconds. There is no cooking involved.
+ Suppose you want to time a 3 minute long distance phone call.
Procedure
Pad Order
Display
1. Enter desired time.
,I
I
r-i 17 1
-1
I,/ 1-r 1
2. Touch the TIME R pad.
j TIMER
The timer will begin counting down to zero. When the timer reaches zero, the signal will sound. The
time of day will reappear on the display. To cancel the minute timer during operation,
simply touch
the CLEAR pad and the time of day will reappear.