Sharp R-9320 Service Manual page 17

R-9320
R-9450
To Monitor Temperature ;
If the temperature probe is plugged into the receptacle in the top centre of the oven cavity and the
probe is placed in water or food, the temperature of the water or food can be monitored on the
readout.
Procedure
Pad Order
Display
/
1 1. Touch the TEMP pad.
I
/
I
TEMP
i Temperature detected by ,
temperature probe will appear /
/ on display.
30°C
to 112" C
/ will be displayed.
I
1
1 The time of day will reap-
pear on the display.
1
CLEAR
/ 2. To return to the time of day.
To Cook by Temperature Followed by Time
This oven can be programmed to maintain any temperature from 30°C to 93°C for
up
to 99 minutes,
similar to the automatic thermostat on an electric skillet or on a conventional range. This feature can
be used to keep food warm at the desired serving temperature until ready to eat, or food can be
simmered at a specific temperature for up to 99 minutes.
* Suppose you want to heat a spaghetti sauce to 80°C on MED HIGH and then maintain exactly
80°C for 1 hour to blend the flavors and thicken the sauce.
r-
Procedure Pad Order
/
Display
c
1. Place probe in casserole of spaghetti
sauce. Insert plug into the receptacle
in the top centre of the oven cavity.
Enter desired temperature.
-I__
8 0
2. Touch the TEMP pad to select tem-
perature cooking.
/ TEMP
TEMP
3. Select desired variable cooking cont-
rol setting.
MED HIGH
TEMP
M. HIGH
4. Enter desired cooking or "holding"
time to maintain 80°C for 1 hour.
i
When oven temperature
is
lower
than 30°C.
5. Touch the START pad.
When the internal temperature reach-
es 3O"C, the readout will display the
actual temperature of the food as it
increases to 80" C.
When it reaches 80°C.
I,- r-l
I7 i-l
TEMP l-1 1-1 l i-i I-I 1
COOK
The cooking time will count down to zero. When the timer reaches zero, all indicator lights will go c
and an audible signal will sound.
The time of day will reappear on the display.
It
NOTE. In the above example, if the actual temperature drops below 90°C during the 60 minutes
"holding" time, microwave energy will come on long enough to boost the temperature back
up to 80°C. The HIGH indicator will light momentarily while the microwave energy is on.
The programmed temperature can be checked during cooking or during the "holding"
time
by touching the TEMP pad.
AS
soon as your finger is removed from the TEMP pad, the
display will resume counting down to zero.
15