Table of Contents
Advertisement
Activity Zone: Settings
Entering the Settings Menu
To enter the Settings Menu make sure the Activity Zone is illuminated, but a workout is NOT in progress. Press and hold
the Leg Sculptor and Stride Down keys for three plus seconds. The display will beep consecutively three times and
display the text "settings" in the lower left corner.
Adjusting Settings Menu Options
To make adjustments to the Settings Menu Options use the Stride Length Up/Down keys.
Scrolling Through Settings Menu Options
Press the Leg Sculptor key to accept a setting or value and move to the next settings menu option.
Auto-Enter Feature
Auto-enter is always active in the Settings Menu. Auto-enter will automatically save and scroll to the next settings menu
option after 20 seconds without a key press.
Stride Limitation-Over Actuated
"Stride" blinks on the console until off time has been fulfi lled.
Settings
Audio – (AU) displayed – This function will turn beeps ON or OFF in the Activity Zone.
Contrast – (CO) displayed – This function will allow adjustment of the contrast in the Activity Zone. Options are
Low, Mid and High.
Units – (Un) displayed – This function toggles units in the Activity Zone between inches and centimeters.
Language – (LA) displayed – This function toggles the displayed language of the Activity Zone between
English and German.
Duty Cycle – (STRIDE) displayed – This function allows the actuator's duty cycle to be turned on to prevent the
repeated over use of the actuator.
Exiting the Settings Menu
Press the Leg Sculptor key to scroll through all the menu options. Press the Leg Sculptor key on the fi nal settings menu
option, Language (LA), to exit the Settings Menu. In addition, if there is no key press after 20 seconds in the Language
(LA) option, the Settings Menu will be exited.
Leg Sculptor Key
Used to save changes and
scroll to the next setting option.
Press Leg Sculptor key on the
final menu option to exit the
Settings Menu.
Stride Up Key
Used to increase values
or settings in the settings menu.
Stride Down Key
Used to decrease values or
settings in the settings menu.
Press and hold the Leg Sculptor key
for 3+ seconds then press the
Stride Down key to enter the
Settings Menu.
18
Advertisement
Table of Contents
