11 EXTERNAL MONITOR
This function opens squelch when Ext. Monitor terminal
receives a signal.
The signal is assigned to pin 15 of control interface jack
(25-pin connector) that is located on rear panel.
Table 1-2 Assigning signals to 25-pin connector.)
! Configuration of KPG-91D
" Configuring the External Monitor (Refer to FPRG
6.4.1 "Optional Features 1" tab.)
Note:
# The Ext. Monitor terminal is fixed to Active Low.
# TKR-750/850/751/851 operates in the signalling squelch mode
when a channel is configured to the decode signalling mode
even if the Ext. Monitor terminal is operating.
Version: 1.01 USA
(Refer to
Function Reference (FUNC)
28