Table of Contents
Advertisement
About this manual
This manual describes the functions of the TKR-750/850
version2 and TKR-751/851 and how to configure these
functions.
How to read this manual
This manual has the following sections. In each section,
each function has the reference data in order to find the
cross-referenced information. As for the functions that
you can configure using KPG-91D, you can see the refer-
ence data since it is described as (< Configuration on the
KPG-91D).
The abbreviation of sections are used to specify the docu-
ments.
Function Reference (FUNC)
This section describes every function.
Field Programming Reference (FPRG)
This section describes how to configure using KPG-91D.
Modification Information (MOD)
This section describes how to modify the hardware.
About notations
Following are notations used in this manual.
[]
The characters in parentheses indicate the name of the
operating portion of the TKR-750/850 version2 and the
key of the PC.
""
The characters in these marks indicate the name of the
functions, buttons, and menus displayed on the display of
KPG-91D.
About trademark
IBM® is a trademark or a registered trademark of Interna-
tional Business Machines Corporation.
Microsoft® and Windows are trademarks or registered
trademarks of Microsoft Corporation in the United States
and/or other countries.
Other company names and product names are trade-
marks or registered trademarks of the companies.
Version: 1.01 USA
Description of the TKR-50 Series
! About the TKR-50 Series
The TKR-750/850/751/851 is the rack-mounted
repeater operating with the UHF/VHF band and it can
be controlled by external devices and the Air Remote.
You can build the most advanced communications
system by using the monitoring function and the
remote control function.
! Features of the TKR-750/850 version 2 and 751/851
•
Field Programing by KPG-91D.
•
16 channel capability.
•
Firmware update into flash memory through the exter-
nal source.
•
QT/DQT signalling on each channel and decode up to
16 QT/DQT tones.
•
DSP is processing audio frequency response.
•
Time Out Timer limiting duration to make a continuous
transmission.
•
The Priority Scan allows you to configure the channels
to be periodically scanned.
•
CW ID function, you can configure the speed, trans-
mission interval, and the frequency on each channel.
•
Remote control by connecting the Remote Controller.
•
Detect the malfunctions and report the status from the
AUX terminal.
•
External terminal for connecting the external controller
to make Trunking systems.
•
TKR-750/850 version2 has DTMF Air Remote func-
tion.
•
Courtesy Tone notifying that is transmitted at end of
the transmission.
•
Multi-mode.
TKR-750/751 Wide:30/25 kHz Narrow:15/12.5 kHz
TKR-850/851 Wide:25 Narrow:12.5 kHz
You can configure following items through the PC using
the KPG-91D.
•
CW ID Deviation
•
DQT Deviation
•
Maximum Deviation
•
QT Deviation
•
Repeat Gain Level
•
TX Power
•
RX Audio Signal Output (RA)
•
RX Detector Signal Output (RD)
•
Test Tone Deviation
•
TX Audio Input (TA)
'• DTMF Deviation
•
Battery Operation Tone
Function Reference (FUNC)
I
Advertisement
Table of Contents
