Optional Accessories; External Speaker); 外部扬声器 ) - Kenwood NXR-810 Service Manual

OPTIONAL ACCESSORIES /

When Using an External Speaker
1. Make sure the unit's power is tuned off.
2. When using the external speaker, remove the jumper
lead from the connector, and attach the speaker cable.
3. When not using the external speaker, replace the jumper
lead and insert the connector into the speaker jack (pin 9
and 12).
Specifi cations
Maximum input power ................................................... 40W
Impedance ......................................................................... 4Ω
Dimensions (W x H x D) projection not included
.............................................................129 x 129 x 77 mm
Weight ............................................................................820g
可选附件
: KES-5 (EXTERNAL SPEAKER /
Jumper lead
跨接线
Connector
连接器
13
15
12
1
6
3
Black lead
黑色导线
Crimp terminal
压接式端子
Black/White lead
(E23-0613-05)
黑色/白色导线
使用外部扬声器时
1. 确认单元电源已关闭。
2. 使用外部扬声器时，从连接器上拆下跨接线，然后安装扬
声器电缆。
3. 不使用外部扬声器时，重新安装跨接线，将连接器插入扬
声器插孔 ( 针脚 9 和 12)。
规 格
最大输入功率...................................... 40W
阻抗.............................................. 4Ω
尺寸（宽 × 高 × 深 ) 不包括凸起部分
................................... 129×129×77 mm
重量............................................. 820g
Speaker cable
扬声器电缆
NXR-810
外部扬声器
)
KES-5
149