Table of Contents
Advertisement
18.1.3 PF Key Transponder
This function notifies the transmitting party that TKR-750/
850/751/851 has accepted the transmitted Air remote
code and the assigned PF key function has been
activated/deactivated.
(Refer to 19 Transpond.)
It is possible to select a timing to transmit Transpond
code within "Before", "After" or "both"
Also it is possible to configure a transpond code to
activate/deactivate each other by FPU.
PF Key Transponder Activation
TKR-750/850/751/851 transmits a Transpond code when
the assigned PF key function is activated by the Air
Remote.
PF Key Transponder Deactivation
TKR-750/850/751/851 transmits a Transpond code when
the assigned PF key function is disabled by the Air
Remote.
! Configuration of KPG-91D
" Configuring the PF Key Transponder (Refer to
FPRG 6.9.1 "PF Key" tab.)
" Configuring the PF Key Transponder Activation
(Refer to FPRG 6.9.1 "PF Key" tab.)
" Configuring the PF Key Transponder Deactivation
(Refer to FPRG 6.9.1 "PF Key" tab.)
18.1.4 Single Tone for the PF Key
Transponder
You can select DTMF or Single Tone as the Transpond
code when the DTMF signalling is configured.
! Configuration of KPG-91D
" Configuring the Single Tone for the PF Key
Transponder (Refer to FPRG 6.9.1 "PF Key" tab.)
Note: You cannot individually select the DTMF/Single Tone for
the PF Key Transponder Activation and Deactivation.
Version: 1.01 USA
18.2 Control the Auxiliary Ports
It can control the assigned function to Auxiliary Port by
the Air Remote.
When no function is assigned to an Auxiliary Ports, you
can control an external devices as I/O port.
For instance, TKR-750/850/751/851 alerts you that the
door has been opened if the door sensor is connected to
an Auxiliary port, or you can turn the air conditioner On/
Off by the operation of the Auxiliary Output port.
You can configure the following functions to control an
Auxiliary Ports by KPG-91D.
Aux In Activation
Aux In Deactivation
Aux Out Activation
Aux Out Deactivation
Aux In/Out Transpond
Aux Transpond Activation
Aux Transpond Deactivation
18.2.1 Aux Input Activation
This function activates the function assigned to Auxiliary
Input port by Air Remote.
TKR-750/850/751/851 activates the function when the
received code matches.
When no function is assigned to the Auxiliary Port, you
can perform the Encode function by interlocking with the
sensor input of the external device.
Note: Although you can configure three functions (1st, 2nd and
3rd) to the Auxiliary Input port, you can activate only the
function configured to the 1st function by Air Remote.
(Refer to 20 Function Port.)
! Configuration of KPG-91D
" Configuring the Aux Input Activation (Refer to
FPRG 6.9.2 "AUX Input/Output" tab.)
18.2.2 Aux Input Deactivation
This function disables the function assigned to the
Auxiliary Input port by the Air Remote.
TKR-750/850/751/851 disables the function when the
received code matches.
You can configure the Air Remote code by selecting the
Encode/Decode code of the DTMF.
When no function is assigned to an Auxiliary Input Port,
you can enable the encode function by interlocking with
the sensor input of the external device.
Note:
Function Reference (FUNC)
18 REMOTE CONTROL
(Refer to 20 Function Port.)
40
Advertisement
Table of Contents
