TKR-851
When Using an External Speaker
1. Make sure the unit's power is tuned off.
2. When using the external speaker, remove the jumper lead
from the connector, and attach the speaker cable.
3. When not using the external speaker, replace the jumper
lead and insert the connector into the speaker jack (pin9
and 12).
Specifications
Maximum input power ................. 40W
Impedance .................................... 4Ω
Dimensions (W x H x D) ............... 129 x 129 x 77 mm
projection not included
Weight .......................................... 820g / 1.81 lbs
86
KES-5 (EXTERNAL SPEAKER)
B A
Connector
13
15
12
1
6
Black lead
3
Crimp terminal
(E23-0613-05)
Black/White lead
51/16 x 5-1/16 x 3 inches
U P
C K
Jumper lead
Speaker cable
KES-5