Test Tone - Kenwood TKR-750-850 Function Reference

23 TEST TONE

This function is used to transmit a single tone when the
function assigned to the PF key or the Auxiliary Input Port
activates. You can use this function when adjusting the
output level of the TKR-750/850/751/851. You can also
configure the frequency of the single tone to be
transmitted.
! Configuration of KPG-91D
" Configuring the frequency of the Test Tone (Refer
to FPRG 6.4.1 "Optional Features 1" tab.)
Note: TKR-750/850/751/851 only transmits the CW ID/
Message when transmitting the CW ID/Message while
transmitting the Test Tone. TKR-750/850/751/851 does
not modulate the audio signal while transmitting the Test
Tone. (Refer to 22 CW ID/CW Message.)
Version: 1.01 USA Function Reference (FUNC) 57