Table of Contents
Advertisement
10 POWER CONTROL
Name of
Description of functions
functions
QT/DQT Decode
Enables a QT/DQT Decode code. It
Enable
becomes signalling squelch.
Disables a QT/DQT Encode function. A
QT/DQT Encode
signalling code configured on each channel
Disable
is NOT transmitted.
Enables the QT/DQT Encode function. A
QT/DQT Encode
signalling code configured on each channel
Enable
is transmitted.
Disables a repeat function.
Repeat Disable
It is necessary to assign a repeat channel to
be valid this function.
Enables the repeat operation.
Repeat Enable
It is necessary to assign a repeat channel to
be valid this function.
Disables the scan function. The channel
Scan Off
scan is stopped.
Enables the scan function. The channel scan
Scan On
is started.
Disables the Scrambler function.
Scrambler Off
It is necessary to install a scrambler board
into TKR-750/850/751/851 to be valid.
Enables the Scrambler function.
Scrambler On
It is necessary to install a scrambler board
into TKR-750/850/751/851 to be valid.
Disables the squelch function. The squelch is
Squelch Off
opened.
Enables the squelch function. The squelch is
Squelch On
closed.
Test Tone Off
Test tone is stopped modulating.
Test Tone On
Test tone is started modulating.
TOT Disable*2 Disables the Time Out Timer function.
TOT Enable*2
Enables the Time Out Timer function.
TX Disable
All transmission is restricted.
TX Enable
All transmission is permitted.
*1: You cannot switch the power to Low Power while TKR-750/850/
751/851 is transmitting or scanning. The Low Power status is
held even if a channel is changed or turned ON/OFF.
*2: This function can be used for the TOT of Local Mic PTT and
Repeater/External PTT.
! Configuration of KPG-91D
" Configuring the functions relating to the operation
of the power (Refer to FPRG 6.4.3 "Others" tab
(Optional Features)
10.1 Backup Battery System
25
The Backup Battery System is a function to configure the
timing to emit the Backup Battery Warning Tone/
Operation Tone.
You can configure the Backup Battery Warning Tone/
Operation Tone to sound when the power is switched
from the main power to the backup power, and the
voltage of the main power becomes lower than the Power
Supply Lower Level.
Level.)
! Configuration of KPG-91D
" Configuring the Backup Battery System (Refer to
FPRG 6.4.1 "Optional Features 1" tab.)
Function Reference (FUNC)
(Refer to 9.2.2 Backup Battery Tone.)
(Refer to 10.2 Power Supply Lower
Version: 1.01 USA
Advertisement
Table of Contents
