External Speaker); Programming Interface Cable) - Kenwood TKR-740 Service Manual

KES-4 (EXTERNAL SPEAKER)
Connector
3
1
6
Black lead
15 12
13
Crimp terminal
(E23-0613-05)
Black/White lead
7
When using an external speaker :
1. M ake sure the unit's pow er is turned OFF.
2. When using the external speaker, remove the jumper
lead from the connector, and attach the speaker cable.
7
SPECIFICATIONS
Specifications KES-4
Speaker size 120mm
M aximum input pow er 20W
Impedance 4 ohms
Frequency response 100 to 5000 Hz
Dimensions (W ✕ H ✕ D) 127 ✕ 127 ✕ 65mm
projection not inclrded 5" ✕ 5" ✕ 2-9/16"
Weight 780g (1.72lbs)
127
TKR-740
KES-4
Jumper lead
Speaker cable
3. When not using the external speaker, replace the jumper
lead and insert the connector into the speaker jack. (pins
9 and 12)
TKR-740
KPG-46 (PROGRAMMING INTERFACE CABLE)
KPG-46 External view
128