Mechanical Structure - Electrolux GS 23 CH Service Manual

Comfort levels SL.3/Sli.3
8-sensor electronic / PNC 153 0259-09/0
Internal designation : TES 505/153 0894 00
2 red LEDs (salt and shine agent)
8 green LEDs for all programmes, Eco, Stop and Timer
5 yellow LEDs as programme sequence indicator
2 7-segment displays for start delay and remaining washing time
5 programmes : glasses/normal/intensive/short/pre-rinse
3 additional functions : Eco / half-load/start delay
2 incorporated Pretests
Important Note :
All electronics supplied under GS 24 are already equipped with the latest software version F. This has
been introduced in order to prevent the same programmes under series GS 23 and series GS 24 from
being provided with different indexes.
5.2

Mechanical structure

Lowest comfort level:
Support panel made of plastic, design panel in varnished steel or stainless steel.
The design panel will be interlaced with the support panel.
Medium comfort level:
Support panel made of plastic, design panel from glass, decorating strips of varnished steel or
stainless steel, decorative rings around the keys.
All components are glued together, the decorative rings are snapped into the glass.
Highest comfort level:
Support panel made of plastic, design panel with sensor electronic on the rear
glass, decorating strips of varnished steel or stainless steel.
All components are glued together.
Spares Operation 07.02 A. B. - 30 -
= Start delay
= Glasses
= Normal
= Intensive
= Short
= Pre-rinse
= Eco
= Half-load
side made of
599 51 13 34 EN