Mechanical Connection - Electrolux EFTD052E Installation Manual

NOTE!
General ventilation for the room should be still
provided in accordance with "UNI ISO EN
7730" norm, "VDI2052" guideline and "DW/172
UK" or local regulation.
G.4

Mechanical connection

NOTE!
Make sure that the room temperature where you
install the machine must be at least 18℃ [64.5℉].
IMPORTANT
Do not place the dishwasher near hot sources such
as fryers, ovens, or hotplates.
Arrange the modules of the machine:
• Wear protective gloves and unpack the modules of the
machine.
• Only when the modules are in the right position and
sequence, remove the wooden pallet.
34
Join the modules
• Remove the front and back panels of each modules.
• Use a lift truck to position each module in the required
position.
• Place the first module near the second and join them with
the special spacers and the respective screws and washers
(see detail "A").
• Join also the drain hoses of each modules (see detail "B").
• Make sure the modules are correctly aligned. Adjust the
modules by turning the special adjustable feet. If necessary
use a pallet trucks to make easy this operation.