Electrolux GS 23 CH Service Manual page 9

Installation
- Place appliance in front of the recess. Draw
cables and hoses towards adjacent cupboard.
- Push the appliance in, while continuously
drawing along the cables and hoses, ensuring to
prevent these from being buckled.
- Align the dishwasher and secure it at both sides
in the upper part of the washing compartment
shell (Detail B).
- Optional fitting positions: At the base (Detail C).
Optional accessories available: Additional lugs
at the cover, PNC 153 04 02 00 (Detail D).
Electrical connection
A licensed electrical fitter should install the connection
to the mains!
- The appliance is provided with a power cable 3 x
1 mm2 with injection-moulded plug (type 13).
- You should connect the dishwasher to the
mains by means of a plug, or an all-polo-switch
of a minimum of 3mm contact distance should
be provided within the fixed installation for
isolation from the mains.
Installation on the part of the customer:
- Install fuse, feeder and socket according to the
wiring schematic.
Spares Operation 07.02 A. B.
Detail B
Detail C
Detail D
Circuit: Radiator voltage 230 V
- 9 - 599 51 13 34 EN