Electrolux GS 23 CH Service Manual page 54

Pump support
Thermostats, regeneration valve
Thermostat and the NTC sensor behind it
Retainer for electrical
components
Spares Operation 07.02 A. B.
When mounting the recycling pump, note
the following :
-
-
-
-
Regeneration valve
- 54 -
You can re-use the strap-type hose
clamp if you press it together with a
diagonal cutting nipper.
If you cannot re-use this clamp, use
a new screwed clamp.
Carefully install the rubber foot and
the hose fixture.
Dismantle the pre-door.
Unscrew the two fastening screws
and remove the lower part of the
front base plate.
REED Relay salt indication
Water softener
599 51 13 34 EN