Logging - Add Server; Figure 52 Logging; Table 33 Logging - ZyXEL Communications ES-1528 User Manual

Chapter 17 Event Logging

Figure 52 Logging

The following table describes the labels in this screen.

Table 33 Logging

LABEL
Add Server
Logging Target
Apply

17.3 Logging - Add Server

Use this screen to configure a new syslog entry. Click Add Server in the Logging screen to
view the screen as shown.
98
DESCRIPTION
Click this to configure a new syslog server.
Click the RAM or Flash links to view the logs stored on the switch.
Use the columns on the right to select the types of system events each logging
target should record. Select:
• Error - to record system failures, such as events which will cause the switch to
malfunction and events such as invalid user input in the web configurator.
• Warning - to record non critical errors on the switch. The switch will continue to
function when warnings are recorded.
• Info - to record regular system events, such as configuration changes or logins.
• Debug - to record events which can be helpful for engineering debugging of the
switch's function. This field is not recommended to track as it creates many
messages not helpful to typical users.
For RAM and Flash logs you can also hit Clear to delete all log entries.
For each Server log you configured you can hit Delete to remove this syslog server
from logging system events for the switch.
Click Apply to save your changes to the switch.
ES-1528 User's Guide