Virtual Server Rule Add; Table 20 Nat Port Forwarding - ZyXEL Communications P-663H-51 User Manual

See Appendix D on page 185
following table describes the fields in this screen.

Table 20 NAT Port Forwarding

LABEL
Add
Remove
Server Name
External Port
Start, External
Port End
Protocol
Internal Port
Start, Internal
Port End
Server IP
Address

7.3.1 Virtual Server Rule Add

To create a virtual server rule, click Advanced Setup > NAT > Virtual Servers > Add to
open the following screen.
P-663H-51 User's Guide
Chapter 7 Network Address Translation (NAT) Screens
for port numbers commonly used for particular services. The
DESCRIPTION
Click this button to go to a screen where you can configure a new entry.
To remove an entry(ies), select its Remove check box and click the Remove
button.
This name identifies the virtual server entry.
These are the ports of traffic coming in from the WAN to which this virtual server
entry applies.
This is the underlying protocol of the traffic to which this virtual server entry
applies.
These are the ports the ZyXEL Device uses for the traffic that it forwards based on
this virtual server entry.
This is the LAN IP address to which the ZyXEL Device forwards the incoming
traffic.
75