Viewing Ram And Flash Logs; Figure 53 Logging - Add Server; Figure 54 Logging - Ram/Flash; Table 34 Logging - Add Server - ZyXEL Communications ES-1528 User Manual

Figure 53 Logging - Add Server

The following table describes the labels in this screen.

Table 34 Logging - Add Server

LABEL
Name
IP Address
Port
Facility
Add

17.4 Viewing RAM and Flash Logs

Use these screens to view or export RAM or Flash logs. Click the RAM or Flash link in the
Logging screen to view the following screen (Logs - RAM is shown here).

Figure 54 Logging - RAM/Flash

ES-1528 User's Guide
DESCRIPTION
Enter a short descriptive name for identifying this server.
Enter the IP address in dotted decimal notation of the syslog server you want to add.
Specify the UDP port for sending log messages to this server. Typically port 514 is
used with syslog.
The log facility allows you to send logs to different files in the syslog server. Refer to
the documentation of your syslog server for more details.
Click Add to save this entry to the switch and return to the Logging screen.
Chapter 17 Event Logging
99