Create Ieee 802.1Q Vlan Screen; Edit Ieee 802.1Q Vlan Screen; Figure 32 Vlan: Create Vlan; Table 13 Vlan: Create Vlan - ZyXEL Communications ES-1528 User Manual

8.2.2 Create IEEE 802.1Q VLAN Screen

See Section 8.1 on page 63
panel to display the IEEE 802.1Q VLAN screen as shown next.

Figure 32 VLAN: Create VLAN

The following table describes the labels in this screen.

Table 13 VLAN: Create VLAN

LABEL
New VLAN ID
ALL
1...28
Create
Cancel

8.2.3 Edit IEEE 802.1Q VLAN Screen

See Section 8.1 on page 63
panel to display the IEEE 802.1Q VLAN screen as shown next.
ES-1528 User's Guide
for more information on VLANs. Click VLAN in the navigation
DESCRIPTION
Enter the VLAN ID of the VLAN you want to create.
This button allows you to configure all the ports at once. Click this button to change
the state of all the ports at once. The possible states are:
empty - This indicates that the port is not part of the VLAN.
T - This indicates that this port is a member of the VLAN. When the packet leaves
the member port, the VLAN tag is added.
U - This indicates that this port is a member of the VLAN. When the packet leaves
the member port, the VLAN tag is removed.
These buttons allow you to specify whether the individual ports are members of this
VLAN. Click the buttons below the numbers to change the state of the ports. The
possible states are:
empty - This indicates that the port is not part of the VLAN.
T - This indicates that this port is a member of the VLAN. When the packet leaves
the member port, the VLAN tag is added.
U - This indicates that this port is a member of the VLAN. When the packet leaves
the member port, the VLAN tag is removed.
Click Create to add this VLAN to the switch.
Click Cancel to return to the VLAN status screen without making any changes.
for more information on VLANs. Click VLAN in the navigation
Chapter 8 VLAN
65