Port Settings; Chapter 6 Port Settings; Port Status; Figure 27 Port Status - ZyXEL Communications ES-1528 User Manual

C
H A P T E R
This chapter describes how to view and configure the port settings on the switch.

6.1 Port Status

Use this screen to view switch port settings. Click System > Port in the navigation panel to
display the Port Status screen.

Figure 27 Port Status

The following table describes the labels in this screen.

Table 8 Port Status

LABEL
Refresh
Port
Link Status
Speed Duplex
ES-1528 User's Guide
DESCRIPTION
Click this to update the PORT Status screen.
This identifies the Ethernet port. Click a port number to display the Port
Configuration screen (refer to
This field displays the link status of the port. Up, if the port is enabled and active or
Down, if the port is disabled or not connected to any device.
This field displays the speed either 10Mbps, 100Mbps or 1000Mbps and the duplex
mode Full or Half.

Port Settings

Section 6.2 on page 56.)
6
55