Snmp Trap Station - Create; Snmp Trap Station - Modify; Figure 70 Snmp Trap Station - Create; Table 51 Snmp Trap Station - Create - ZyXEL Communications ES-1528 User Manual

Chapter 18 SNMP
Table 50 SNMP Trap Station (continued)
LABEL
Community
String
Previous Page/
Next Page

18.6.1 SNMP Trap Station - Create

Click on the Create New Trap Station link in the SNMP Trap Station screen to add an
SNMP Trap Station. The screen displays as shown.

Figure 70 SNMP Trap Station - Create

The following table describes the labels in this screen.

Table 51 SNMP Trap Station - Create

LABEL
Remote IP
Address
Community
String
Create
Cancel

18.6.2 SNMP Trap Station - Modify

Click on the Trap Station ID number or select a Trap Station ID from the Trap Station ID
drop down list box in the SNMP Trap Station screen to modify the settings of an existing trap
station.
116
DESCRIPTION
An SNMP community string is a text string that acts as a password. It is used to
authenticate messages that are sent between the management station (the SNMP
manager) and the device (the SNMP agent). The community string is included in
every packet that is transmitted between the SNMP manager and the SNMP agent.
This field displays the community string of this remote trap station.
Use these navigation links to browse all of your SNMP groups.
DESCRIPTION
Enter the IP address of the remote trap station in dotted decimal notation.
Specify the community string used with this remote trap station.
Click this to add this SNMP user to the switch.
Click this to go back to the main SNMP Group screen without saving your changes.
ES-1528 User's Guide