Table of Contents
Advertisement
Advertisement
Table of Contents
Troubleshooting
Related Manuals for ZyXEL Communications ES-1016
Summary of Contents for ZyXEL Communications ES-1016
- Page 1 Dimension ES-1016/ES-1024 Ethernet Switch User’s Guide January 2003...
- Page 2 ZyXEL Communications Corporation. Published by ZyXEL Communications Corporation. All rights reserved. Disclaimer ZyXEL does not assume any liability arising out of the application or use of any products, or software described herein.
-
Page 3: Zyxel Limited Warranty
Dimension ES-1016/ES-1024 Ethernet Switch ZyXEL Limited Warranty ZyXEL warrants to the original end user (purchaser) that this product is free from any defects in materials or workmanship for a period of up to two (2) years from the date of purchase. During the warranty period and... -
Page 4: Interference Statements And Warnings
Dimension ES-1016/ES-1024 Ethernet Switch Interference Statements and Warnings FCC Interference Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operations. -
Page 5: Customer Support
Dimension ES-1016/ES-1024 Ethernet Switch Customer Support If you have questions about your ZyXEL product or desire assistance, contact ZyXEL Communications Corporation offices worldwide, in one of the following ways: Contacting Customer Support • When you contact your customer support representative, have the following information ready: •... -
Page 7: Table Of Contents
Dimension ES-1016/ES-1024 Ethernet Switch Table of Contents Copyright .............................. ii ZyXEL Limited Warranty........................iii Interference Statements and Warnings .................... iv Customer Support ..........................v List of Figures ............................. ix List of Tables ............................ix Preface ..............................x Chapter 1 Getting to Know Your switch ..................1-1 Introduction ........................ -
Page 9: List Of Figures
Figure 2-3 Mounting the ES to an EIA standard 19-inch rack................2-5 Figure 2-4 Rear Panel of the ES-1016/ES-1024 ....................2-6 Figure 2-5 The Front Panel of the ES-1016 ......................2-6 Figure 2-6 The Front Panel of the ES-1024 ......................2-6 Figure 2-7 The Front Panel LEDs of the ES-1024....................2-7 List of Tables Table 2-1 Network Cable Types ..........................2-7... -
Page 10: Preface
Ethernet ports however the images used in this User’s Guide show the 24 available ports that are featured on the ES-1024. Images that directly relate to the ES-1016 are used when referring to the key differences between the two models. -
Page 11: Chapter 1 Getting To Know Your Switch
Dimension ES-1016/ES-1024 Ethernet Switch Chapter 1 Getting to Know Your switch This chapter describes the key features, benefits and applications of your switch. Introduction The switch is a multi-port switch that can be used to build high-performance switched workgroup networks. -
Page 12: Features
Power, LK/ACT and FD/COL LEDs. • Standard 19-inch rack-mount design. Package Contents Compare the contents of your ES-1016/ES-1024 Ethernet Switch package with the checklist below. If any item is missing or damaged, please contact your local dealer. • ES-1016/ES-1024 Ethernet switch •... -
Page 13: Bridging
Dimension ES-1016/ES-1024 Ethernet Switch Figure 1-3 Standalone ES-1024 Workgroup Example 1.4.2 Bridging With its large address table (8000 MAC address entries) and high performance, the switch is an ideal solution for department networks to connect to the corporate backbone or for connecting network segments. -
Page 14: Chapter 2 Hardware Description And Installation
Dimension ES-1016/ES-1024 Ethernet Switch Chapter 2 Hardware Description and Installation This section shows two switch installations, describes the hardware of the switch and gives a functional overview of the switch. The switch is suitable for an office environment where it can be rack mounted on standard EIA racks or as a standalone. -
Page 15: Rack-Mount Installation
Dimension ES-1016/ES-1024 Ethernet Switch Rack-Mount Installation The switch can be mounted on an EIA standard size, 19-inch rack or in a wiring closet with other equipment. Follow the steps below to mount your switch on a standard EIA rack using the included rack-mounting kit. -
Page 16: Rear Panel
Front Panel The front panel of the switch includes the auto-negotiating 10Base-T/100Base-TX RJ-45 ports and the LEDs. 16 RJ-45 Ports Figure 2-5 The Front Panel of the ES-1016 24 RJ-45 Ports Figure 2-6 The Front Panel of the ES-1024 2.5.1 10Base-T/100Base-TX RJ-45 auto-negotiating ports Your switch comes with 16 or 24 10Base-T/100Base-TX RJ-45 ports depending on the model of your switch. -
Page 17: Auto-Sensing Mdi/Mdix Ports
Dimension ES-1016/ES-1024 Ethernet Switch 2.5.2 Auto-sensing MDI/MDIX ports Each 10Base-T/100Base-TX RJ-45 MDI/MDIX port allows you to connect to a computer or to a hub using either a straight-through or a crossover Ethernet cable. 2.5.3 Front Panel Connections You can use unshielded twisted pair (UTP) or shielded twisted-pair (STP) Ethernet cables for RJ-45 ports. -
Page 18: Chapter 3 Troubleshooting
Dimension ES-1016/ES-1024 Ethernet Switch Chapter 3 Troubleshooting This section describes common problems you may encounter with the switch and possible solutions. Introduction Troubleshoot the switch using the LEDs to detect problems. 3.1.1 PWR LED The PWR LED on the front panel does not light up. -
Page 19: Improper Network Cabling And Topology
Dimension ES-1016/ES-1024 Ethernet Switch Table 3-3 Troubleshooting FD/COL LED STEP CORRECTIVE ACTION Your network is busy. Try sending large files later, reduce the number of users or segment your network. Improper Network Cabling and Topology Improper network cabling or topology setup is a common cause of poor network performance or even network failure. -
Page 21: Appendix A Product Specifications
IEEE802.3u 100BASE-TX Fast Ethernet (twisted-pair copper) Standards ANSI/IEEE802.3 Auto-negotiation IEEE802.3x Flow Control ES-1024: 24 10/100BASE-T Ethernet ports Interface ES-1016: 16 10/100BASE-T Ethernet ports Ethernet: 10Mbps(half duplex) 20Mbps (full duplex) Data Transfer Rate Fast Ethernet: 100Mbps (half duplex) 200Mbps(full duplex) 10BASE-T: UTP Cat.3, 4, 5 (100 m) EIA/TIA-586 100-ohm STP (100 m) Network Cables 100BASE-TX: UTP Cat.5 (100 m max.) EIA/TIA-568 100-ohm STP (100 m... - Page 22 Dimension ES-1016/ES-1024 Ethernet Switch Operational Humidity 10% to 90% (Non-condensing) FCC Class A, CE Safety UL, cUL Product Specifications...
-
Page 23: Index
Dimension ES-1016/ES-1024 Ethernet Switch Index 10 Mbps Ethernet..........2-7 Installation Desktop ............2-4 Rack-Mount ..........2-5 About the ES-1000 Series Ethernet to Ethernet Switches ............x Applications ............1-2 LED Descriptions Segment Bridge ..........1-3 FD/COL ............2-7 LK/ACT ............2-7 PWR..............2-7 Cabling Length ..........3-9 CE ................iv Certification ............iv... - Page 24 Dimension ES-1016/ES-1024 Ethernet Switch repair ..............iii FD/COL LED..........3-8 Return Material Authorization number ....iii Improper Network Cabling and Topology .. 3-9 LK/ACT LED ..........3-8 Return Material Authorization number ..See Power LED........... 3-8 Service..............iii ventilation............2-4 Standalone Workgroup ........