The following table describes the labels in this screen.
Table 49 SNMP Notification
LABEL
Enable SNMP
Notification
Enable
Authentication
Notification
Apply
18.6 SNMP Trap Station
SNMP traps are used to send out SNMP notifications of urgent or normal events in the system
to external management stations. Use the SNMP Trap Station screen to enable the sending of
SNMP traps to a remote SNMP management station(s). Click SNMP > Trap Station to view
the screen as shown.
Figure 69 SNMP Trap Station
The following table describes the labels in this screen.
Table 50 SNMP Trap Station
LABEL
Trap Station ID
Create New
Trap Station
Trap Station ID
Remote IP
Address
ES-1528 User's Guide
DESCRIPTION
Select this to enable the sending of SNMP traps to a remote SNMP management
station.
Select this to enable logging of failed authentication attempts.
Click this to save your settings to the switch.
DESCRIPTION
Select the SNMP trap station you want to edit.
Click this to configure a new SNMP Trap Station.
This field indicates the trap station number. It is used for identification only. Click on
the individual trap station number to edit the trap station settings.
This field displays the IP address of the remote SNMP management station.
Chapter 18 SNMP
115